C54400C54400 Speciﬁcation Sheet Millard Wire & Specialty Strip Co • 449 Warwick Industrial Drive • Warwick, RI 02886 Phone: (401) 737-9330 • Fax: (401) 737-9340 4 Typical Uses Electrical Electrical Connectors Industrial Bushings, Gears, Pinions, Screw Machine Products, Thrust Washers, Valve Parts, Sleeve Bearings, Thrust Bearings, Bearings ...
C54400 Alloy, C544 Phosphor Bronze - Concast MetalExtruded and Drawn Phosphor bronze alloys such as C54400, also known as C544, consist of copper with 0.50–11.00% tin and 0.01–0.35% phosphorus. The tin increases the corrosion resistance and strength of the alloy. The phosphorus increases the wear resistance and stiffness of the alloy.
C54400 Solid Round Bar|.093"OD x 12"LC54400 Round Bar| .093"OD x 12"L. WEIGHT|2# Typically ships from NJ; INDUSTRIAL: Bushings, Gears, Pinions, Shafts, Valve Parts, Sleeve Bearings, Thrust Bearings ...
C54400 Phosphor-Bronze | Busby MetalsHome / Products / Phosphor Bronze Alloys / C54400 Phosphor-Bronze. Alloy Description: Phosphor Bronze EU: CW456K, CuSn4Zn4Pb4 This lower-strength, wrought-hardened, leaded–zinc Copper Alloy is used in applications such as bushings, gears, pinions, screw machine products, thrust washers, valve parts, sleeve bearings, thrust bearings, and shafts.
STANDARD-STOCKED PRODUCT C54400 Cast and DrawnC54400 continued Extruded or Cast and Drawn Products | C54400 Physical Properties US Customary Metric Melting Point – Liquidus 1830 ˚F 999 ˚C Melting Point – Solidus 1700 ˚F 927 ˚C 3Density 0.320 lb/in at 68 ˚F 8.89 gm/cm3 at 20 ˚C Specific Gravity 8.89 8.89 Electrical Conductivity 19% IACS at 68 ˚F 0.111 MegaSiemens/cm at 20 ˚C
C54400 Alloy - randallbearings.comPhosphor bronze alloys such as C54400, also known as C544, consist of copper with 0.50–11.00% tin and 0.01–0.35% phosphorus. The tin increases the corrosion resistance and strength of the alloy. The phosphorus increases the wear resistance and stiffness of the alloy.
CuSn4Zn4Pb4/CuSn4Pb4Zn4-C54400 Free Cutting Phosphor BronzeC54400 can be work-hardened up to 800 N/mm2 and therefore if of considerably higher strength than lead-containing brass alloy. When annealed, this metal can be bent, formed, blanked, and stamped. Typical Application for C54400 Phosphor Bronze Alloys
Shaft Sleeves | McMaster-CarrChoose from our selection of shaft sleeves, including dry-running sleeve bearings, sleeve bearings, and more. In stock and ready to ship.
SKF Speedi-Sleeve | SKFThe standard size range covers sleeves for shaft diameters from 11,99 to 203,33 mm (0.472 to 8 in.). Depending on production quantities, non-standard sizes can be manufactured. Each sleeve is designed to fit a specific shaft diameter range, usually above and below the nominal shaft diameter.